Deutsch: Gas- und WasserinnendruckteileEnglisch translation: gas-injection and water-injection moulded parts 
KudoZ The KudoZ network provides a framework for translators ... More  |
|
| Glossareintrag (aus Frage unten abgeleitet) | | Deutsch Begriff oder Satz: | Gas- und Wasserinnendruckteile | | Englisch Übersetzung: | gas-injection and water-injection moulded parts | | Eingetragen von: | Jeana Clark |
| Optionen:
- Zu diesem Eintrag beitragen |
Übersetzungen Deutsch > Englisch [PRO]
Tech/Engineering - Automatisierung und Robotik / Erodiertechnik, Kunststofftechnik | | Deutsch Begriff oder Satz: Gas- und Wasserinnendruckteile | This is from an "Anwender-Reportage" re: Erodiertechnik. I have been researching Erodiertechnik and have learned that it is related to EDM (Electrical Discharge Machining) or "EDM machines". My research regarding Spritzgießtechnik leads me to "plastic injection molds/technology"..
However, this section has me stumped, any insight would be appreciated!
Die Stärken sieht XX hier vor allem in der langjährigen Erfahrung bei der Entwicklung und dem Bau von Spritzgussformen für hochwertige Sicht- und Funktions-Bauteile im Automotivbereich.
Das meint hochpräzise Formen für Gas- und Wasserinnendruckteile und Mehrkomponentenformen ebenso wie Formen für das Monosandwichverfahren oder zur Umspritztechnik bis hin zu Formen mit konturnaher Kühlung. |
|  Jeana ClarkKudoZ-AktivitätFragen: 27 (alle geschlossen) Antworten: 4
Vereinigte Staaten
| |
| | gas-injection and water-injection moulded parts | Erklärung:
found via a 'lucky' google hit for 'innendruck'
see e.g.:
Internal Gas - 'Short Shot' Method
Process Sequence
Mould closes and a precise controlled volume of plastic is injected into the mould cavity.
After a selected time delay, gas is injected into the molten plastic to complete filling of the cavity and to pack the moulding with gas.
Gas then continues to pack the moulding uniformly as it expands to compensate for volumetric shrinkage of the plastic as it cools.
Plastic refill in the moulding machine can commence as soon as the plastic feed point has solidified, or after the nozzle valve is closed.
Gas is vented to atmosphere before mould opening.
http://www.gasinjection.com/short_shot.php
Water Injection Moulding - new methods of using water instead of gas to further reduce time cycles of thick section tubular products.
Water Injection Moulding (WAM) is also based on the PEP process.
The mould cavity is filled and partially packed with plastic gas. Gas or water injection creates the initial bubble, followed by water injection to pack the cavity and then sequencing the opening of a shut-off valve to enable the expulsion of molten plastic to the secondary cavity. The secondary cavity is then pierced to allow water to flow through the gas channel(s) to cool the plastic. Water is then drained from the cavity by gas pressure or by air injection to dry the part before opening the mould and ejecting the part.
http://www.gasinjection.com/water.php
British Plastics & Rubber this month's contents
Bayer designs nylons for water injection. No hydrolytic degradation when water is used to core out mouldings.
Gas injection for multi-station moulding. ...
www.polymer-age.co.uk/apr04.htm |
| Ausgewählte Antwort von:
 Ken Cox
Niederlande
| Hinweis von Fragesteller an den AntwortendenMy thanks to all three of you! I chose this answer because of the valuable information included.
4 KudoZ-Punkte wurden für diese Antwort vergeben |
|
5 Stunden Antwortsicherheit:   |
| parts exposed to interior gas or water pressure
Erklärung:
a total guess! I.e., there's pressurized gas or water in them when they are installed
| Teresa Reinhardt
Vereinigte Staaten
Arbeitsgebiet
Muttersprache: Deutsch, Englisch
PRO-Punkte in Kategorie: 13
|
| | Login to enter a peer comment (or grade) |
21 Stunden Antwortsicherheit: |
| gas-injection and water-injection moulded parts
Erklärung:
found via a 'lucky' google hit for 'innendruck'
see e.g.:
Internal Gas - 'Short Shot' Method
Process Sequence
Mould closes and a precise controlled volume of plastic is injected into the mould cavity.
After a selected time delay, gas is injected into the molten plastic to complete filling of the cavity and to pack the moulding with gas.
Gas then continues to pack the moulding uniformly as it expands to compensate for volumetric shrinkage of the plastic as it cools.
Plastic refill in the moulding machine can commence as soon as the plastic feed point has solidified, or after the nozzle valve is closed.
Gas is vented to atmosphere before mould opening.
http://www.gasinjection.com/short_shot.php
Water Injection Moulding - new methods of using water instead of gas to further reduce time cycles of thick section tubular products.
Water Injection Moulding (WAM) is also based on the PEP process.
The mould cavity is filled and partially packed with plastic gas. Gas or water injection creates the initial bubble, followed by water injection to pack the cavity and then sequencing the opening of a shut-off valve to enable the expulsion of molten plastic to the secondary cavity. The secondary cavity is then pierced to allow water to flow through the gas channel(s) to cool the plastic. Water is then drained from the cavity by gas pressure or by air injection to dry the part before opening the mould and ejecting the part.
http://www.gasinjection.com/water.php
British Plastics & Rubber this month's contents
Bayer designs nylons for water injection. No hydrolytic degradation when water is used to core out mouldings.
Gas injection for multi-station moulding. ...
www.polymer-age.co.uk/apr04.htm
| Ken Cox
Niederlande
Muttersprache: Englisch
PRO-Punkte in Kategorie: 12
|
| Hinweis von Fragesteller an den Antwortenden| My thanks to all three of you! I chose this answer because of the valuable information included. |
| | Login to enter a peer comment (or grade) |
1 Tag11 Stunden Antwortsicherheit: |
Zur KudoZ-Liste zurückkehren
| |
The translation workplace 
