Word has deteted a problem and must close Initiator des Themas: Lia Fail (X)
| Lia Fail (X) Spanien Local time: 14:31 Spanisch > Englisch + ...
Word 2000 Windows XP Trados 6 mICROSOFT word HAS DETECTED A PROBLEM AND MUST CLOSE This happened earlier today, the document kept closing on me, and despite saving it anew in different ways and closing down and restarting, I couldn't fix the doc, so had to start from scratch with the source retranslating from Trados. Seems like the doc wwas irretrievably corrupted. It's NOW doing it again, after having retranslated for a couple of hours, you cannot i... See more Word 2000 Windows XP Trados 6 mICROSOFT word HAS DETECTED A PROBLEM AND MUST CLOSE This happened earlier today, the document kept closing on me, and despite saving it anew in different ways and closing down and restarting, I couldn't fix the doc, so had to start from scratch with the source retranslating from Trados. Seems like the doc wwas irretrievably corrupted. It's NOW doing it again, after having retranslated for a couple of hours, you cannot imagine how p***** off I am getting, as it's just losing me loads of time. What's going on?
[Subject edited by staff or moderator 2005-03-28 18:24] ▲ Collapse | | | Jeff Allen Frankreich Local time: 14:31 Mehrere Sprachen + ... how to get around the closing MS Word problem | Mar 28, 2005 |
Ailish Maher wrote: Word 2000 Windows XP Trados 6 mICROSOFT word HAS DETECTED A PROBLEM AND MUST CLOSE This happened earlier today, the document kept closing on me, and despite saving it anew in different ways and closing down and restarting, I couldn't fix the doc, so had to start from scratch with the source retranslating from Trados. Seems like the doc wwas irretrievably corrupted. It's NOW doing it again, after having retranslated for a couple of hours, you cannot imagine how p***** off I am getting, as it's just losing me loads of time. What's going on? Not sure what the problem is, but if possible, I suggest that you copy and paste text of the document into another blank, document, save that, and start with that clean doc that shouldn't have any bugs. If you are only doing text, and want to start really clean, copy and paste the text to Notepad, Save the notepad files as plain ascii text, and then open that again and put into a blank Word doc. That will clean up a lot of problems. But it won't help you much if you have tables and charts to translate. Jeff http://www.geocities.com/jeffallenpubs/localization.htm | | | Ralf Lemster Deutschland Local time: 14:31 Englisch > Deutsch + ...
Adding to Jeff's comment: Not sure what the problem is, but if possible, I suggest that you copy and paste text of the document into another blank, document, save that, and start with that clean doc that shouldn't have any bugs. Before copying, deselect the last paragraph mark in the document (Shift + LeftArrow); Word stores a lot of formatting information in that character - sometimes problems are in there, too... Cheers, Ralf | | | Hynek Palatin Tschechische Republik Local time: 14:31 Englisch > Tschechisch + ... Possible workarounds | Mar 28, 2005 |
Try to save the original document as RTF and pretranslate it. Check "Segment unknown sentences". Keep saving the document under different names (*_v1.doc, *_v2.doc, etc.) as you translate. Do it frequently. This way, you will be able to return to the last working version. If the problem occurs at particular segment, skip it and translate it manually (just overwrite the text; or copy it into a temporary document as a non-formatted text and translate it there, so that it'... See more Try to save the original document as RTF and pretranslate it. Check "Segment unknown sentences". Keep saving the document under different names (*_v1.doc, *_v2.doc, etc.) as you translate. Do it frequently. This way, you will be able to return to the last working version. If the problem occurs at particular segment, skip it and translate it manually (just overwrite the text; or copy it into a temporary document as a non-formatted text and translate it there, so that it's entered in the TM, and then overwrite the source in the actual document with the translation). ▲ Collapse | |
|
|
Lia Fail (X) Spanien Local time: 14:31 Spanisch > Englisch + ... THEMENSTARTER seems to have reolved itself temprarily | Mar 28, 2005 |
....but I will come back soon and clarify. Meanwhile thansk to all for the rapid response and suggestions:-) | | | The same happened to me some time ago... | Mar 28, 2005 |
Ailish Maher wrote: ....but I will come back soon and clarify. Meanwhile thansk to all for the rapid response and suggestions:-) as Word kept closing out of the blue and I didn't know how to cope with the problem (even after having created a new file in which I had copied the text and even trying to read the file from a floppy on another PC!). Before the program would close, I got a message to contact Microsoft to inform them of the problem (by clicking on the relevant button "OK"), but I ignored it as I was really nervous and in a rush. Finally I took care of the message, clicked the "OK" and got to the Microsoft site. There appeared some other messages and I was even asked to insert the Office CD-ROM (which I did) and then... the problem was fixed! And till then I had re-written my translation 3 times (what a bad time!). Hope this helps. Viktorija | | | Lia Fail (X) Spanien Local time: 14:31 Spanisch > Englisch + ... THEMENSTARTER reply to Jeff | Mar 28, 2005 |
Jeff Allen wrote: Not sure what the problem is, but if possible, I suggest that you copy and paste text of the document into another blank, document, save that, and start with that clean doc that shouldn't have any bugs. If you are only doing text, and want to start really clean, copy and paste the text to Notepad, Save the notepad files as plain ascii text, and then open that again and put into a blank Word doc. That will clean up a lot of problems. But it won't help you much if you have tables and charts to translate. Jeff http://www.geocities.com/jeffallenpubs/localization.htm Tried the first solution, but it didn't work. Can't apply the second as it would take me hours to re-format. See further comments below. | | | Lia Fail (X) Spanien Local time: 14:31 Spanisch > Englisch + ... THEMENSTARTER I have tried these options too | Mar 28, 2005 |
Hynek Palatin wrote: Try to save the original document as RTF and pretranslate it. Check "Segment unknown sentences". Keep saving the document under different names (*_v1.doc, *_v2.doc, etc.) as you translate. Do it frequently. This way, you will be able to return to the last working version. If the problem occurs at particular segment, skip it and translate it manually (just overwrite the text; or copy it into a temporary document as a non-formatted text and translate it there, so that it's entered in the TM, and then overwrite the source in the actual document with the translation). But it seems to be related to a footnote problem, see my comments below. | |
|
|
Lia Fail (X) Spanien Local time: 14:31 Spanisch > Englisch + ... THEMENSTARTER an option, thanks | Mar 28, 2005 |
Viktorija Grozio wrote: ....got to the Microsoft site. There appeared some other messages and I was even asked to insert the Office CD-ROM (which I did) and then... the problem was fixed! And till then I had re-written my translation 3 times (what a bad time!). Hope this helps. Viktorija I never advanced that far as it didn't seem particularly useful, and like you, I am trying to get a job done....I will consider it in the future. | | | Lia Fail (X) Spanien Local time: 14:31 Spanisch > Englisch + ... THEMENSTARTER
All day this has been going on... First Word started closing, for no apparent reason, and despite copting, pasting, renaming, etc it still wouldn't function, so I just had to get out the source and fuzzy translate from memory (but minor changes I had made manually weren't recorded...sigh!) Next I had a Trados-footnote problem (the toolbars disppeared from Word) which I rectified. I carried on for a few hours without problems, then I opened another footnote ... See more All day this has been going on... First Word started closing, for no apparent reason, and despite copting, pasting, renaming, etc it still wouldn't function, so I just had to get out the source and fuzzy translate from memory (but minor changes I had made manually weren't recorded...sigh!) Next I had a Trados-footnote problem (the toolbars disppeared from Word) which I rectified. I carried on for a few hours without problems, then I opened another footnote and this provoked more Word misbehaviour (although note that it wasn't the footnote that had caused this misbevaiour the first time around). Thanks for all teh suggestions, anyway:-) I give up, I0m too p***** off and tomorrow is another day..... ▲ Collapse | | | Balasubramaniam L. Indien Local time: 18:01 Mitglied (2006) Englisch > Hindi + ... SITE LOCALIZER Could be a virus | Mar 29, 2005 |
Check for virus infestation. Some viruses like Backdoor.Hackdoor do this kind of mischief. You could also try reinstalling Word. This will take about 40 to 50 minutes on a reasonably fast PC. But if there is a virus, then you should first remove it before reinstalling the program. Again, if the above virus is detected, removal can be quite tedious as it bores into the registry level records, which leaves the ultimate last option -- to reformat the hard disc... See more Check for virus infestation. Some viruses like Backdoor.Hackdoor do this kind of mischief. You could also try reinstalling Word. This will take about 40 to 50 minutes on a reasonably fast PC. But if there is a virus, then you should first remove it before reinstalling the program. Again, if the above virus is detected, removal can be quite tedious as it bores into the registry level records, which leaves the ultimate last option -- to reformat the hard disc. I hope it doesn't come to that. Regards ▲ Collapse | | | To report site rules violations or get help, contact a site moderator: You can also contact site staff by submitting a support request » Word has deteted a problem and must close CafeTran Espresso | You've never met a CAT tool this clever!
Translate faster & easier, using a sophisticated CAT tool built by a translator / developer.
Accept jobs from clients who use Trados, MemoQ, Wordfast & major CAT tools.
Download and start using CafeTran Espresso -- for free
Buy now! » |
| Protemos translation business management system | Create your account in minutes, and start working! 3-month trial for agencies, and free for freelancers!
The system lets you keep client/vendor database, with contacts and rates, manage projects and assign jobs to vendors, issue invoices, track payments, store and manage project files, generate business reports on turnover profit per client/manager etc.
More info » |
|
| | | | X Sign in to your ProZ.com account... | | | | | |