Export for test Initiator des Themas: Marcos Zattar
|
|---|
Marcos Zattar
Deutschland
Local time: 07:22
Mitglied (2007)
Deutsch > Portugiesisch
+ ...
MemoQ does not allow me to export an unfinished translation for test purposes - I get error messages about missing tags. How could I overcome this?
| | | | | What is the purpose of the test? | May 14, 2010 |
I'd say that you'd need to copy the source to the target in all segments (or in the still untranslated segments), and then export. That way all tags would be there in the target.
Now, would you mind telling us what is the purpose of the test? There might be alternatives to what you intend to do.
| | | | | export for test | May 14, 2010 |
As Tomas says, you will need to add the source text to the target section to make the tags balance out. Generally, as a rule, doing this is the easiest way of being able to export an unfinished translation.
Slàinte - Ruairidh
| | | | Denis HAY 
Local time: 07:22
Englisch > Französisch
| Copy source to target where empty | May 14, 2010 |
Hi Marcos and Tomás,
If you want to export an unfinished document, proceed as follows:
• Export your document as MBD (memoQ bilingual)
• Open it and select Operations -> Copy source to target where empty
• Now you can export your document. All "untranslated" parts will simply show the original source text
• Once this is done, reimport the MBD you originally exported to restore your document to its previous state OR filter on "edi... See more Hi Marcos and Tomás,
If you want to export an unfinished document, proceed as follows:
• Export your document as MBD (memoQ bilingual)
• Open it and select Operations -> Copy source to target where empty
• Now you can export your document. All "untranslated" parts will simply show the original source text
• Once this is done, reimport the MBD you originally exported to restore your document to its previous state OR filter on "edited" rows only and clear them. ▲ Collapse
| | |
|
|
|
| Good practice in some cases... | May 14, 2010 |
Tomás Cano Binder, CT wrote:
I'd say that you'd need to copy the source to the target in all segments (or in the still untranslated segments), and then export. That way all tags would be there in the target.
True.
You must populate the target and resolve all the errors.
Now, would you mind telling us what is the purpose of the test? There might be alternatives to what you intend to do.
Well.
Sometimes you may have documents which simply refuse to export or export incorrectly.
It's better to know it a little bit earlier than in the last minute 
E.g. I remember a lot of files I was unable to export in Trados and/or DVX with no apparent reasons (no QA warnings etc.), so I consider it may be a good practice for some tricky or huge files (kinda a 150 MB PPT one).
When the populated file doesn't export, you start to imagine workarounds BEFORE you start to work...
BTW.
Recently, I was unable to export a small 600 word INX file translated in Trados (in fact, only 50 words to do, so I did it directly in Trados...).
The segmentation wth an empty Trados TM and a retranslation in MQ did the trick.
Then TagEditor was able to export the file
For the export tests in Trados, see e.g. the KB article related to InDesign files:
http://talisma.sdl.com/article.aspx?article=1936&p=1
Cheers
GG
[Edited at 2010-05-14 08:57 GMT]
| | | | Marcos Zattar
Deutschland
Local time: 07:22
Mitglied (2007)
Deutsch > Portugiesisch
+ ...
THEMENSTARTER | checks and practicality | May 14, 2010 |
"Now, would you mind telling us what is the purpose of the test? There might be alternatives to what you intend to do. "
The answer for this is obvious:
- check formatting
- check if the export is working (and not have a surprise 10 minutes before the deadline)
- check everything you want and need to check
- other reasons that might occur to you
- some other checks
....
the convert/export/import solution offered i... See more "Now, would you mind telling us what is the purpose of the test? There might be alternatives to what you intend to do. "
The answer for this is obvious:
- check formatting
- check if the export is working (and not have a surprise 10 minutes before the deadline)
- check everything you want and need to check
- other reasons that might occur to you
- some other checks
....
the convert/export/import solution offered is extreeeeemely unpractical. ▲ Collapse
| | | | | Thanks a lot! | May 14, 2010 |
Marcos Zattar wrote:
- check formatting
- check if the export is working (and not have a surprise 10 minutes before the deadline)
- check everything you want and need to check
- other reasons that might occur to you
- some other checks
Indeed this makes sense.
However, I have never encountered a situation in which a file that correctly imports in MemoQ does not export in the end, so this is a check I never do. I might do it in very special cases, like INX files for instance, but other than that... I just go ahead and translate. In case of any trouble later on, I have the translations in the memory and can easily recover from import/export issues.
[Edited at 2010-05-14 10:23 GMT]
| | | | harbasz
Luxemburg
Local time: 07:22
Englisch > Polnisch
+ ...
| export/import | May 14, 2010 |
Denis HAY wrote:
• reimport the MBD you originally exported to restore your document to its previous state OR filter on "edited" rows only and clear them.
Wouldn't it be easier to just use Operations > Clear Translations ... > Clear what (unconfirmed segments), without going the whole export/import route to restore the document to its original state after the test export?
| | |
|
|
|
Denis HAY
Local time: 07:22
Englisch > Französisch
| Depends on how you work… | May 14, 2010 |
Grzegorz Harbaszewski wrote:
Wouldn't it be easier to just use Operations > Clear Translations ... > Clear what (unconfirmed segments), without going the whole export/import route to restore the document to its original state after the test export?
Hence my second suggestion. But some people prefer to type in everything, then confirm only afterwards. This is a bad practice, as you loose some leverage, but still, some people do that.
In such cases, there would be no easy way to distinguish the new "copied from source and unconfirmed" segments from the old "translated yet not confirmed" segments.
One way around that is to filter on anything not-empty, select all, lock segments, then only run the copy from source where empty. That way, you can clear anything you want later on. But for most people, a simple export/import is much easier than play around with filtered views and segments statuses.
| | | | To report site rules violations or get help, contact a site moderator: You can also contact site staff by submitting a support request » Export for test | TM-Town | Manage your TMs and Terms ... and boost your translation business
Are you ready for something fresh in the industry? TM-Town is a unique new site for you -- the freelance translator -- to store, manage and share translation memories (TMs) and glossaries...and potentially meet new clients on the basis of your prior work.
More info » |
| | Trados Studio 2022 Freelance | The leading translation software used by over 270,000 translators.
Designed with your feedback in mind, Trados Studio 2022 delivers an unrivalled, powerful desktop
and cloud solution, empowering you to work in the most efficient and cost-effective way.
More info » |
|
| | | | X Sign in to your ProZ.com account... | | | | | |
Login to reply/comment 
